If I find a good illustration I will forward it on...
Your Haffiefriend,
~Kiola~
Brier, WA
--- In haflingerfriends@yahoogroups.com, "alana" <alana@...> wrote:
>
> I am sure others will respond as well. I view that bit as the cheap bit you get free with some headstalls. Anyway if you ride two handed, english, i would look into a kimberwick type bit. This has a mullen mouth which is not exactly like a low port, but there is basically no chance of hitting the horse on the roof of the mouth with the kimberwick since there is no port. The mullen mouth just helps the bit fit over the tongue and may make room in the mouth for the bit and tongue to be happy together.
>
> I dont really see how a low port can give any true tongue relieve and instead i would think it would cause roof of the mouth pain for the horse if the shanks of the bit are pulled back (port swings forward).
>
> Anyway just an option.
>
> This one does sort of have a port.
> http://www.doversaddlery.com/product.asp?pn=X1-01106&ids=408895020
>
> They do make them in mullen mouth, but goodness i cannot find a link right this second.
>
> They also make them in the happy mouth style
>
> http://www.adamshorsesupply.com/browse.cfm/4,4313.html
>
> Others may also comment, but i have read to stay away from jointed bits that use a curb chain, as the joint will flex causing the curb chain to loosen and loose effectiveness. Just because your bit has a curb chain does not mean you need to use it. If you take out the curb chain, the bit will become basically a D shaped mullen mouth.
>
> http://www.horsesuppliesdirect.com.au/images/z121040.jpg
>
> http://www.englishhabit.com/mullen-mouth-bits.aspx
>
> Good luck
> Alana
> Baltimore, MD
>
>
>
>
> -----Original Message-----
> From: HRT hrhorses@...
> Sent 1/10/2010 9:38:54 PM
> To: haflingerfriends@yahoogroups.com
> Subject: [haflingerfriends] Asking for Advice on Bit
>
> I am looking at purchasing another Haffie, a gelding that is ridden in a bit
> that I am not knowledgeable with. The current owners use a low port, curb
> bit. It is the type below (hopefully the links transfer in this message).
> I've always thought of it as the cheap bit that you get with off the shelf
> lower end bridles. When they got it out to put on him I cringed in my mind.
> However, he rode very well with it.
> http://www.buytack.com/products/bits/wea/graphics-2007/25-208-np.jpg
>
>
>
> I have always used an Eggbutt snaffle. I ride two handed, use an English
> bridle. Don't show, don't have to conform to any rules of any organizations
> or such, I just prefer this bit & the English bridle. Sooo. my question is.
> how different would this type of bit (see link below) be for him if I
> switched him over.
> http://www.horsetrainingvideos.com/images/bit-gd-lowport.jpg
>
>
> I'm afraid to go to a snaffle with him since he is going so well with the
> low port curb but I've never ridden in a curb & I prefer to ride two handed.
> Could I do that with this bit? The shanks on it do swivel to allow the
> horse to escape some of the pressure, which I like, but I'm debating whether
> to just go to my mild Eggbutt snaffle. But I keep thinking, if he's going
> well in that bit, why fix something that isn't broken?
>
> Is there another option that I should consider, one that would keep the feel
> of the bit relatively the same for him, but allow me to ride two handed,
> and/or possibly allow me to not have to use a curb chain & switch my bridle
> out for a western style?
>
>
> I know this is OT somewhat, but it is for a Haflinger, so hopefully it'll be
> allowed. LOL.
>
> Stay warm everyone,
> Jen in MN
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Community email addresses:
> Post message: haflingerfriends@yahoogroups.com
> Subscribe: haflingerfriends-subscribe@yahoogroups.com
> Unsubscribe: haflingerfriends-unsubscribe@yahoogroups.com
> List owner: haflingerfriends-owner@yahoogroups.com
>
> Shortcut URL to this page:
> http://groups.yahoo.com/group/haflingerfriendsYahoo! Groups Links
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/haflingerfriends/
>
> * Your email settings:
> Individual Email | Traditional
>
> * To change settings online go to:
> http://groups.yahoo.com/group/haflingerfriends/join
> (Yahoo! ID required)
>
> * To change settings via email:
> haflingerfriends-digest@yahoogroups.com
> haflingerfriends-fullfeatured@yahoogroups.com
>
> * To unsubscribe from this group, send an email to:
> haflingerfriends-unsubscribe@yahoogroups.com
>
> * Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
------------------------------------
Community email addresses:
Post message: haflingerfriends@yahoogroups.com
Subscribe: haflingerfriends-subscribe@yahoogroups.com
Unsubscribe: haflingerfriends-unsubscribe@yahoogroups.com
List owner: haflingerfriends-owner@yahoogroups.com
Shortcut URL to this page:
http://groups.yahoo.com/group/haflingerfriendsYahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/haflingerfriends/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/haflingerfriends/join
(Yahoo! ID required)
<*> To change settings via email:
haflingerfriends-digest@yahoogroups.com
haflingerfriends-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
haflingerfriends-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
